Netscout OneTouch AT 10G, Руководство пользователя

Страница: 176 / 248

OneTouch AT 10G
User Manual
174
Enable IPv6 on the Wired Interface
To enable IPv6 address capability on the wired interface:
1
On the HOME screen, tap TOOLS .
2
In the Test Settings section, tap the Wired button.
3
Tap the Address button.
4
Tap the IPv6 On button.
View or Change the analyzer’s MAC Addresses
If your network uses a MAC Access List, you will need to view the
analyzer’s MAC address and add it to the access list. The MAC is
shown at the bottom of the ADDRESS screen.
To connect to the OneTouch AT 10G analyzer for remote viewing
or remote file access you will need to know the IP address of the
management port.
Ethernet MAC Address
To view or change the MAC address of the network under test
port:
1
On the HOME screen, tap the TOOLS icon .
2
Tap the Wired button.
3
Tap the Address button.
4
Tap the User MAC On button.
5
Tap the User MAC Address button and enter the desired
address.
Management Port MAC Address
The Management port MAC address can be viewed but it cannot
be changed.
To view the Management Port MAC address:
1
On the HOME screen, tap TOOLS .