Supplemental Information
43
N750 Wireless Dual Band Gigabit Access Point WNDR4300-TN
Factory Settings
You can return the access point to its factory settings. Use the end of a paper clip or a similar
object to press and hold the
Restore Factory Settings
button on the back of the access
point for at least five seconds. The access point resets and returns to the factory
configuration settings shown in the following table.
Feature
Default behavior
Access point
login
User name (case-sensitive)
admin
Login password (case-sensitive)
password
Local network
(LAN)
LAN IP address
192.168.0.51
Subnet mask
255.255.255.0
Time zone
GMT +01:00
Time zone adjusted for daylight
saving time
Disabled
Allow a registrar to configure this
router
Enabled
Wireless
Wireless communication
Enabled
SSID name
See access point label
Network key
See access point label
Channel width - 2.4 GHz
20 Mhz
Channel width - 5 GHz
Auto
Security
WPA-PSK(TKIP) + WPA2-PSK(AES)
Broadcast SSID
Enabled
Transmission speed
Auto
*
* Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.
Country/region
Europe
RF channel
Auto
WiFi standard
2.4 GHz: b/g/n
5 GHz: a/n
