Administration
26
N750 Wireless Dual Band Gigabit Access Point WNDR4300-TN
Upgrade the Firmware
The access point firmware (routing software) is stored in flash memory. You can update the
firmware from the Administration menu, which you access from the ADVANCED tab. You
might see a message at the top of the genie screens when new firmware is available for your
product.
To update your access point:
1.
Select
ADVANCED > Administration > Firmware upgrade
.
2.
Click the
Browse
button.
Locate and select the firmware file you downloaded (the file ends in
.img
).
3.
Click the
Upload
button.
The access point begins the update.
WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the
upgrade. For example, do not close the browser, click a link, or
load a new page. Do not turn off the access point.
When the upload is complete, your access point restarts. The upgrade process typically
takes about one minute. Read the new firmware release notes to find out if you need to
reconfigure the access point after upgrading.
View Access Point Status
To view access point status and usage information:
Select
Administration > Access Point Status
.
