NETGEAR genie Basic Settings
14
N750 Wireless Dual Band Gigabit Access Point WNDR4300-TN
To view or change basic wireless settings:
1.
Select
BASIC >
Wireless
.
The Wireless Settings screen displays.
The screen sections, settings, and procedures are explained in the following sections.
2.
Select the location where the access point is used.
In the United States, the region is fixed to United States and is not changeable.
3.
Make any additional changes that are needed.
4.
Click the
Apply
button.
Your settings are saved.
Set up and test your wireless devices and computers to make sure that they can connect
wirelessly. If they do not, check the following:
•
Is your wireless device or computer connected to your network or another wireless
network in your area? Some wireless devices automatically connect to the first open
network (without wireless security) that they discover.
•
Does your wireless device or computer display on the Attached Devices screen? If it
does, it is connected to the network.
•
If you are not sure what the SSID or password is, look on the label on your access point.
Wireless Network
There is a separate section for each band, 2.4 GHz b/g/n and 5 GHz. The b/g/n notation
references the 802.11 standards of conformance for the 2.4 GHz radio frequency.
