NETGEAR genie Basic Settings
13
N750 Wireless Dual Band Gigabit Access Point WNDR4300-TN
To connect manually:
1.
On your computer or wireless device, open the software that manages your wireless
connections.
This software scans for all wireless networks in your area.
2.
Look for your network and select it.
The unique WiFi network name (SSID) and password are on the access point label. If you
changed these settings, look for the network name that you used.
3.
Enter the access point password and click the
Connect
button.
Wi-Fi Protected Setup Method
Wi-Fi Protected Setup (WPS) lets you connect to a secure WiFi network without typing its
password. Instead, press a button or enter a PIN.
Some older WiFi equipment is not compatible with WPS. WPS works only with WPA2 or WPA
wireless security.
To use WPS to join the wireless network:
1.
Press the
WPS
button on the side of the access point.
2.
Within two minutes, press the
WPS
button on your wireless device, or follow the WPS
instructions that came with the device.
The WPS process automatically sets up your wireless computer with the network
password and connects you to the wireless network.
BASIC Wireless Settings
You can view or configure the wireless network setup.
The access point comes with preset security. This means that the WiFi network name (SSID),
network key (password), and security option (encryption protocol) are preset in the factory.
You can find the preset SSID and password on the label of the access point.
Note:
The preset SSID and password are uniquely generated for every
device to protect and maximize your wireless security.
Best practice is not to change your preset security settings
.
If you change your preset
security settings, make a note of the new settings and store it in a safe place where you can
easily find it.
If you use a wireless computer to change the SSID or other wireless security settings, you
are disconnected when you click the Apply button. To avoid this problem, use a computer
with a wired connection to access the access point.
