Configure Quality of Service
235
Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports
4.
Enter the switch’s password in the
password
field.
The default password is
password
. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5.
Select
QoS > DiffServ > Advanced > Class Configuration
.
The Class Name page displays.
6.
Select the check box next to the class name.
7.
In the
Class Name
field, specify the new name.
8.
Click the
Apply
button.
Your settings are saved.
Change the Criteria for an Existing DiffServ Class
To change the criteria for an existing DiffServ class:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
password
field.
The default password is
password
. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5.
Select
QoS > DiffServ > Advanced > Class Configuration
.
The Class Name page displays.
6.
Click the class name, which is a hyperlink.
The page on which you can change the class configuration displays.
7.
Change the class configuration as needed.
8.
Click the
Apply
button.
Your settings are saved.
