NETGEAR GC728X Скачать руководство пользователя страница 119

Страница: 119 / 430

Configure Switching

119

Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports

In the

VLAN ID

menu, select the VLAN ID.

In the

Group Operation

menu, select one of the following options, which applies to all ports

in the VLAN:

•

Untag All

. For all ports that are members of the VLAN, tags are removed from all

egress packets.

•

Tag All

. For all ports that are members of the VLAN, all egress packets are tagged.

•

Remove All

. All ports are removed from the VLAN.

In the Ports table, click each port once, twice, or three times to configure one of the following
modes or reset the port to the default settings:

•

T (Tagged)

. Select the ports on which all frames transmitted for this VLAN are tagged.

The ports that are selected are included in the VLAN.

•

U (Untagged)

. Select the ports on which all frames transmitted for this VLAN are

untagged. The ports that are selected are included in the VLAN.

By default, the selection is blank, which means that the port is excluded from the VLAN.

In the LAG table, click each LAG once, twice, or three times to configure one of the following
modes or reset the LAG to the default settings:

•

T (Tagged)

. Select the LAGs on which all frames transmitted for this VLAN are

tagged. The LAGs that are selected are included in the VLAN.

•

U (Untagged)

. Select the LAGs on which all frames transmitted for this VLAN are

untagged. The LAGs that are selected are included in the VLAN.

By default, the selection is blank, which means that the LAG is excluded from the VLAN.

10.

Click the

Apply

button.

Your settings are saved.

Содержание GC728X















































































































































































































































































































































































































































Результаты поиска

Содержание GC728X

Отзывы:

Похожие инструкции для GC728X

Бренды по названию

Популярные бренды

NETGEAR GC728X, Руководство пользователя

Результаты поиска

Содержание GC728X

Отзывы:

Похожие инструкции для GC728X

Бренды по названию

Популярные бренды