Configure Switching
160
Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
password
field.
The default password is
password
. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5.
Select
Switching
> Multicast > IGMP Snooping > Multicast Router VLAN
Configuration
.
The Multicast Router VLAN Configuration page displays.
6.
From the
Interface
menu, select the interface.
7.
In the
VLAN ID
field, enter the VLAN ID.
8.
From the
Multicast Router
menu, select
Enable
or
Disable
.
9.
Click the
Apply
button.
Your settings are saved.
Configure an IGMP Snooping Querier
An IGMP snooping querier is a device that queries devices on the network for multicast
membership.
IGMP Snooping Querier Overview
IGMP snooping requires that one central switch or router periodically query all end-devices
on the network to announce their multicast memberships. This central device is the IGMP
querier. The IGMP query responses, known as IGMP reports, keep the switch updated with
the current multicast group membership on a port-by-port basis. If the switch does not
receive updated membership information in a timely fashion, it stops forwarding multicasts to
the port where the end device is located.
You can configure and display information about IGMP snooping queriers on the network
and, separately, on VLANs.
