Net To Net Technologies SIA2410R User Manual
Net To Net Technologies
54
Command write
config
2> Reboot the SIA2410R to load new firmware to memory.
Command reboot
tftp
When the download process is competed, reset your unit. If
downloading was not successfully completed or a wrong file was
downloaded, the system reboot will not complete successfully. In
such a case, turn the router power switch off and on, and retry
the downloading.
3> Verify the version of the new firmware using following command :
Command
(conf)# show version
~
System Software Release:
3.7.13 [Mon Jan 28 10:16:20 2002] running
new version
3.7.12 [Mon Dec 17 16:19:42 2001] saved
old version
STEP4>
Saving new version to Flash memory
1> Save the downloaded new firmware to Flash memory. When a
confirmation message appears in the screen, press "y". The file
not saved in Flash memory will be lost or damaged when the
system is rebooted.
Command (conf)#
write
tftp
2> Verify new version using following command:
Command
(conf)# show version
~
System Software Release:
3.7.13 [Mon Jan 28 10:16:20 2002] running
new version
3.7.13 [Mon Jan 28 10:16:20 2002] saved
new version
Note:
If the connection to TFTP is not successful even after the TFTP
command was entered, check if the Ethernet communication is live
between the PC and router or if the TFTP server program is running.
