Net To Net Technologies SIA2410R User Manual
Net To Net Technologies
53
Upgrading the System Software
The SIA2410R unit can be upgraded using TFTP (Trivial File Transfer Protocol).
If a newer version of the software for your SIA2410R unit is available, be sure
to follow the instructions below carefully.
Preparing to upgrade
Before upgrading system firmware, be sure to confirm the following
items.
1>
A program that supports the TFTP server function should be
installed on the user's PC in advance.
2>
The binary (BIN) file to be downloaded should be saved on the
user's PC. This file is supported in the form of a binary file such
as sia2410r_<version>.bin.
3>
TCP/IP communication should be possible between the user's
PC and the SIA2410R router.
Note1:
If you upgrade with the wrong file, the unit will not function
and you may have to return it for replacement.
Note2:
If you don’t have a firmware file (BIN file), you may contact
the Net to Net Technologies support department.
Upgrading the system
STEP1>
Make sure the TFTP server is running.
1-1> Place the Firmware file in your TFTP server’s root directory.
STEP2>
To download the new binary image into the router, use the
following command :
Command
tftp <host> <file>
Parameters
<host> TFTP server’s IP address
<file> Firmware
file
name
Note:
If the Firmware file is not in the root directory, you must type
the full path to access the file.
STEP3>
Reboot the SIA2410R to verify the downloaded firmware is
correct. Verify the firmware version after it reboots:
1> Save the current configuration to Flash memory using following
command :
