Net To Net Technologies SIA2410R User Manual
Net To Net Technologies
49
!!! New VLAN parameter entered but not saved !!!
port p1 p2 p3 p4 up vid pri tag-action
--------------------------------------------------
p1 v v 100 7 pass
p2 v v v 200 2 pass
p3 v v v 200 2 pass
p4 v 0 0 pass
up v v v v 500 7 pass
SIA2410R(conf)# vlan restart now
restarting VLAN ...
SIA2410R(conf)# sh vlan
port p1 p2 p3 p4 up vid pri tag-action
--------------------------------------------------
p1 v v 100 7 pass
p2 v v v 200 2 pass
p3 v v v 200 2 pass
p4 v 0 0 pass
up v v v v 500 7 pass
SIA2410R(conf)#
You should enter the “vlan restart now” command after re-configuring the
VLAN map. The command sends all configuration data into the EEPROM and
resets the internal Ethernet switch, then the switch reads configuration data
from the EEPROM and works as configured.
Don’t forget to enter the “vlan restart now” command, or your new
configuration will not take effect.
