Net To Net Technologies SIA2410R User Manual
Net To Net Technologies
21
Setting Encapsulation
The SIA2410R must be configured to use the ‘ntnhdlc’ encapsulation
mode. This is the default setting and should not be changed.
Command
interface wan encap ntnhdlc
Usage examples
(conf)# interface wan encap ntnhdlc
Viewing configuration for the WAN interface
Up/Down status, IP address, routing or bridge mode status,
encapsulation is displayed.
To display the WAN interface configuration, use the following
command:
Command
show interface
[-v|-c] [<ifname>]
Parameters
-v
shows full statistics
-c
initializes the statistics
<ifname>
interface name
Usage Examples
(conf)#
show interface wan
(conf)#
show interface -v wan
(conf)#
show interface –c wan
Note:
To display all interfaces, use “show interface” command.
