Net To Net Technologies SIA2410R User Manual
Net To Net Technologies
34
Setting up Routing-Only Mode
This mode becomes set as a default mode when setting the IP
address in the interface. This mode provides the routing services for
the IP packets. The following command is for manually setting or
deleting the routing mode.
ip routing enable
<ifname>
Command
ip routing disable
<ifname>
Parameters
<ifname> - Interface name
Setting up Routing and Bridging Mode
The following command is available for enabling or disabling the
bridge mode in the specified interface. Setting the bridge mode
without deleting the routing mode will trigger a setup of "Routing and
Bridging Mode".
interface
<ifname>
bridge enable
Command
interface
<ifname>
bridge disable
Parameters
<ifname>
Interface name
enable
enabling the bridge mode
disable
disabling the bridge mode
Confirmation of
Setup
(conf)# sh int
: Confirm "Routing and Bridging Mode".
