Ness Auto IP NVR Скачать руководство пользователя страница 12

Страница: 12 / 94

Manual

MAC Address 1

This item identifies the first Media Access Control (MAC) address of the unit.

MAC Address 2

This item identifies the second MAC address of the unit.

Software Upgrade

This item is used for upgrading software of the Ness Auto IP NVR from a

local device. The menu is displayed as follows.

Software Upgrade via Local Device

Upgrade Version
xxxx-xxxx-xxxx-xxxx

Select

Connect an USB drive containing upgrade software to the unit, then the

available upgrade files will be listed in the menu. To update the system, select

a file and use UP / DOWN keys to choose

<Yes>.

Press ENTER to confirm

the selection and start the upgrade process. The Ness Auto IP NVR loads

the software, updates the system files, and reboots automatically.

The upgrade may take several minutes to save the changes in the memory of

the system. After the unit is rebooted, please check the software version

again.

NOTE: No power interruption is allowed during the software update.

Ensure that no power interruption can occur until the unit is completely

rebooted.

NOTE: Do not remove the external USB ThumbDrive

/ DVD+RW

before the unit has completely shut down (hard drive and fan are off).

Removing the external USB ThumbDrive

/ DVD+RW before shut

down can cause the system to update improperly.

Software Upgrade Via the Internet

This item is used to upgrade the unit’s software via the internet. Select one of

the listed software versions and choose

<Yes>.

The Ness Auto IP NVR

downloads the software, updates the system files, and reboots automatically.

Содержание Auto IP NVR































































































Результаты поиска

Содержание Auto IP NVR

Отзывы:

Бренды по названию

Популярные бренды

Ness Auto IP NVR, Руководство по установке

Результаты поиска

Содержание Auto IP NVR

Отзывы:

Бренды по названию

Популярные бренды