19
Feeder basic information
1
Pick position X/Y:First have to lock the position of component on the feeder(See
fig.5-2),once saved the modification, the XY data will automatically change to the ones after
alignment.
2
Pickup Angle:The initial default angle is 90 degrees, support to do modifying the value
in order to change the mounting angels for wholly feeder if needed.
3
Footprint:Select corresponding footprint,when use the function”Vision Alignment”, will
refer to the values in date base.
4
Placement speed:Control the placement speed for the feeder by adjust the speed values.
5
Vision Alignment:Choose corresponding alignment method under this item.
6
Pick height:Control the pick height by dragging the sideward slider.
Placement height:Set the value according to the component’s actual thickness.
7
Placement/Pick delay:set a little value or 0 both ok.
8
There are two detection methods,Vacuum Detection and Vision Detection.
Vacuum Detection:Once the “Vacuum dete.” is ticked, the sensor of air pressure will be turned on.
If the actual vacuum hasn’t reached the default value during pick and place, the machine will
throw it and re-pick a component.
9
Skip:Once select this item,will skip all placement for this feeder.
Fig.5-1
Fig.5-2
