20
Nozzle Information
Function:Function:Select corresponding nozzles according to actual demand. It will automatically
assign to each feeder in order to meet the requirements of single head or multi heads working.
Align:The nozzle will align to the component’s upside on corresponding feeders when click this
item
Height Test:After clicking this item,the nozzle will go down and check whether the pick height is
ok. Support do adjustment of pick height on feeder information item if needed.
Pick test:After clicking this item,the corresponding nozzle will pick one component and check
whether pick position is ok. Support do adjustment of pick position on feeder information item if
needed.
After finish setting of all above feeders information,then click “assign feeder and nozzle to Chip
list”,then chip list will automatic to be changed correspondingly.
