11
to finish the setting.
(3) Multiple rail feed: This is only available for long board that can’t be handled once, such as
LED strip. After finished one part of PCB, the rails will advance the board and handle the left part
automatically.
(4) Eject PCB front-side:Once selected this item,the PCB will eject at front side when finish
mounting.If don’t select,the PCB will eject at back side.
4.1.2. Setting Panelized PCB & first chip
( manual is the same as
automatic import)
Function: This is mainly to determine the first component on single or panelized PCB of manual
programmed or imported file. The principle is to collect and calculate the data of each board’s
Fig.2
Fig.3
