32
Click the central point among four nozzles under the shot can set the central point.
Another way is press CTRL button then click the mouse to make each nozzle to identify their
own central point in the four quadrants.
(Notice: Please click the LENS ROTATION before setting the suction nozzle, then PnP machine
will collect nozzle’s 360 degree rotation photos to synthesize. After that, press CTRL button to set
each nozzle’s identification of central point.
Save it after finishing the setting.
(3) Correct nozzle 1~nozzle 4 separately.
Click test and go into interface below:
Operation steps: 1.click the button of LENS ROTATION to let machine take photos of nozzle’s
360 degree rotation . 2.click the central point of nozzle
3. Click the save button.
Relative position of nozzle 1 and camera: it is for the synchronism of nozzle and camera,
setting it when placement position do not matched with the camera position.
Click setting then go into interface below:
