16
to move (Visual field/Overall Workbench).Once clicked the “Save” item,the interface will
automatic back to main page,then input the corresponding values(Designator refer to the
location,Specification refer to the value of resistance,Footprint refer to the normal package
info,I.e.0603,0805,1206,Etc.Angle value should be set according to the required direction on the
PCB and polarity ,horizontal direction(0 or 180 degree),vertical direction(90 or -90 degree).The
first component have been completely created after set all above values.The next step is click
“New”item and will pop up one line(completely copy the previous line),then click “Align” to find
and confirm second component(same operation as before)
(2) Import PCB Coordinate File
First generate the coordinates from PCB diagram and put the PCB file on the USB Flash
Disk,then insert it to the machine(There are many kinds of PCB designer software,the only
request is can generate the coordinates from them,file format(.csv)-support use Excel to edit
Remove tick mark before the item”Manual ”and then click “File import”,will pop up one
small dialog,select the required PCB file and then click “Save”item,all data will be automatic
imported to Chip List .(Turn to the “Feeder configuration”interface to do next operation).See
fig.4-2
Fig.4-2
