Nellcor OXIMAX N-600X Series, Руководство оператора

Страница: 71 / 212

Using the Monitor
N-600x Operator’s Manual 63
Alarm Limit Changed Indicator
Alarm limits that have been changed from the institution or factory
default settings are identified by a decimal point (.) after the displayed
reading (%SpO
2
or BPM). The changed parameter is also identified
by a decimal point on the alarm limits screen.
Setting Alarm Limits
The Alarm Limit display enables you to adjust the upper and lower
saturation and pulse rate limits. It also enables you to adjust the
SatSeconds limit.
The Alarm Limit display is accessed by pressing the LIMITS softkey
on the main menu.
The Alarm Limit display includes the alarm limit table and current
measured %SpO
2
and pulse rate. The title of the alarm limit table
indicates whether the instrument is in Adult or Neonate monitoring
mode. If
SatSeconds are enabled, the Alarm Limit display also
includes the SatSeconds indicator. Decimal points after the displayed
%SpO
2
or pulse rate indicate that the respective limits have been
changed from the power-on defaults.