Nellcor OXIMAX N-600X Series, Руководство оператора, Страница: 54 / 212

Using the Monitor
46 N-600x Operator’s Manual
For a sensor containing data, the message identifies the sensor data
type. For a blank sensor, the message identifies the monitor’s current
data type setting used to write data to the sensor. The data type
settings are SpO
2
and SPO
2
+BPM.
Note :The type of data recorded is only displayed when data is present
in the O
XI
M
AX
sensor .
The monitor displays zeros in the %SpO
2
and Pulse Rate displays
while the N-600x is searching for a valid pulse. For optimal
performance, allow the monitor to search and lock onto a pulse for
approximately 5 to 10 seconds.
When a valid pulse is detected, the monitor enters the Monitoring
Mode and displays patient parameters.