Nellcor OXIMAX N-600X Series, Руководство оператора

Страница: 34 / 212

Setting Up the Monitor
26 N-600x Operator’s Manual
Connecting an O
XI
M
AX
Sensor
The O
XI
M
AX
sensor type is shown at the bottom of the display when
an O
XI
M
AX
sensor is connected to the N - 600x or when the monitor
completes POST with an O
XI
M
AX
sensor attached.
Note: Sensor LED light emissions fall within Class 1 level, according
to IEC 60825-1:2001.
Caution: Use only Nellcor-approved O
XI
M
AX
sensors and pulse
oximetry cables.
Note :Physiological conditions, medical procedures, or external
agents that may interfere with the monitor’s ability to detect and
display measurements include dysfunctional hemoglobin, arterial
dyes, low perfusion, dark pigment, and externally applied coloring
agents, such as nail polish, dye, or pigmented cream.
1. Firmly connect a DOC - 10 pulse oximetry cable to the SpO
2
O
XI
M
AX
Sensor Port of the monitor.
2. Connect a Nellcor O
XI
M
AX
SpO
2
sensor to the opposite end of the
DOC - 10 pulse oximetry cable.