Nellcor OXIMAX N-600X Series, Руководство оператора, Страница: 162 / 212

Troubleshooting
154 N-600x Operator’s Manual
The following is a list of possible errors and suggestions.
Table 14: Common Problems and Resolutions
Problem Resolution
There is no response when I press
the ON/STANDBY button. • Ensure the supply voltage selector switch is set
to the proper voltage.
• A fuse may be malfunctioning. Notify a
qualified service technician to check and, if
necessary, replace the fuse.
• If operating on battery power, the battery may
be missing or discharged. If the battery is
discharged, charge the battery, see
Operating
on Battery Power on page 27. If the battery
does not charge, notify a service personnel to
replace the battery.
One or more display elements or
indicators do not light during the
power-on self-test (POST). Do not use the N-600x pulse oximeter; contact qualified
service personnel or your local Nellcor representative.
The monitor is operating on battery
power, even though it is connected
to an AC power source. • Ensure the supply voltage selector switch is set
to the proper voltage.
• Ensure the power cord is properly connected to
the N-600x.
• Check to see if power is available to other
equipment on the same AC circuit.