Nellcor OXIMAX N-560 Скачать руководство пользователя страница 50

Страница: 50 / 146

Audible Alarm Settings and Service Functions

Menu Item 12 (Silence Alarms)

This option is used to set the alarm silence condition. Two options can be

accessed by first pressing the

SatSeconds

Alarm Limit button, then using the

Adjust Up

Adjust Down

button to scroll to the desired option.

• Option 0 = On - the N-560 will not display any alarm conditions (both

audio and visual).

• Option 1 = Off - the N-560 displays alarm as selected by menu

item 11.

When the desired option is indicated in the %SpO

display, press the

SatSeconds

Alarm Limit button to set the current selection. This setting will

remain in effect until the N-560 is turned off. The default selection (Option 1)

will be activated the next time the N-560 is turned on.

WARNING: Do not silence the N-560 audible alarm or decrease its

volume if patient safety could be comprised.

Menu Item 13 (All Display Off)

This menu item is used to enable or disable the display of the N-560. With

menu item 13 selected, press the

SatSeconds

Alarm Limit button, then use the

Adjust Up

Adjust Down

button to scroll to the desired option.

• Option 0 = is On, all normal display is enabled
• Option 1 = is Off, all normal display is disabled

When the desired option is indicated in the %SpO

display, press the

SatSeconds

Alarm Limit button to set the current selection.

If Option “1” Off is selected, all visual display is turned off. Audio sound

cannot be set to off when Option “1” is selected. When any button is pressed,

all visual displays turn on.

Содержание OXIMAX N-560



















































































































































Результаты поиска

Содержание OXIMAX N-560

Отзывы:

Бренды по названию

Популярные бренды

Nellcor OXIMAX N-560, Руководство по обслуживанию

Результаты поиска

Содержание OXIMAX N-560

Отзывы:

Бренды по названию

Популярные бренды