Nellcor OXIMAX N-560, Руководство по обслуживанию

Страница: 15 / 146

N-560 Service Manual 5
R o u t i n e M a i n t e n a n c e
Cleaning
CAUTION: Do not spray, pour, or spill any liquid on the N-560, its
accessories, connectors, switches, or openings in the chassis.
For
surface-cleaning
and
disinfecting
follow your institution's procedures or:
• The N-560 may be
surface-cleaned
by using a soft cloth dampened
with either a commercial, nonabrasive cleaner or a solution of 70%
alcohol in water, and lightly wiping the surfaces of the N-560.
• The N-560 may be
disinfected
using a soft cloth saturated with a 10%
solution of chlorine bleach in tap water.
Before attempting to clean an SpO
2
sensor, read the directions for use
enclosed with the sensor. Each sensor model has cleaning instructions specific
to that sensor.
Periodic Safety Checks
The N-560 requires no routine service or calibration other than changing the
battery at least every two years. See
Battery Removal
on page 66. The
following checks should be performed at least every two years by a qualified
service technician.
1. Inspect the equipment for mechanical and functional damage.
2. Inspect safety labels for legibility. If the labels are damaged, contact
Nellcor’s Technical Services Department, 1.800.635.5267, or your local
Nellcor representative.
Functional Checks
1. If the N-560 has been visibly damaged or subjected to mechanical shock
(for example, if dropped), perform the performance tests. See
Performance Tests
on page 8.