Necta Canto Plus Espresso, Установка, эксплуатация и обслуживание

Страница: 41 / 72

© by N&W GLOBAL VENDING S.p.A.
35
10 2009 3325 - 00
w
ashing
e
naBle The washing key
Use this function to enable the operation of the button
intended to wash mixers.
They key is generally disabled.
a
uTomaTic mixer washing
You can set the time at which you wish to wash the mix-
ers automatically. If you set the time to 12.00 p.m., the
function is disabled (default).
es
uniT washing
Use this function to set up the daily automatic washing
cycle of the espresso unit at the time you wish. If you set
the time to 00:00, the function is disabled.
m
ixer heaTing
If the function is enabled and no dispensing has oc-
curred in the milk or instant coffee mixers in the past 3
minutes, a small hot water quantity is dispensed before
any selection of strong instant coffee, instant coffee with
a drop of milk and espresso coffee with a drop of milk.
m
ixer cooling
(
if The cold uniT is availaBle
)
If the machine is equipped with a cooling unit, the func-
tion is enabled. If no dispensing has occurred in the
mixers of cold drinks in the past 3 minutes, a small cold
water quantity is dispensed before any syrup-based
selection.
a
ccessories
T
ank
Use this function to define whether the vending machine
is supplied by the network or by internal tanks:
0 - water supply from the network;
1 - an internal tank managed individually;
2 - two internal tanks managed to load water alternatively
from the two tanks.
p
hoTocell
On the models equipped with a “cup sensor” composed
by a photocell detecting the presence of an object in the
dispensing compartment.
If the function is enabled and an object is detected in the
dispensing compartment, the cup is not released and
the “No cup” message will appear on the display.
Moreover, you can define whether the failure shall lock
the machine or let it run for use with a pottery cup after
two attempts at releasing a cup without the photocell
detecting any object in the dispensing compartment.
The lamp intended to illuminate the dispensing compart-
ment is controlled by the cup sensor.
If the cup remains in, the “remove the cup” message” will
appear upon request for another selection.
f
lap
Function not active on this model.
J
ug
f
aciliTies
On some models complete with a special key you can
obtain a number (programmable from 1 to 9.5 by default)
of cup-free selections in order to fill in a jug.
s
Tirrer
Use this function to dispense the stirrers of the front col-
umn (single column) only or alternatively from the front
and rear column (double column).
c
up shifT Time
Use this function to increase the time the shift arm will
remain in the cup collection position (in d/s) to help cups
properly drop before the shift arm itself takes the cup to
the dispensing area.
c
up TurreT Time
Use this function to determine the rotation stop delay
time of the cup stacker to balance any inertia due to the
type of cup Use this function to increase the time the
shift arm will remain in the cup collection position (in
d/s) to help cups properly drop before the shift arm itself
takes the cup to the dispensing area.