Necta Canto Plus Espresso, Установка, эксплуатация и обслуживание

Страница: 57 / 72

© by N&W GLOBAL VENDING S.p.A.
51
10 2009 3325 - 00
BOARD FUNCTION
CONFIGURATION OF ELECTRONIC
BOARDS
The electronic boards are designed to be used on sev-
eral equipment models.
If replaced or in order to change the machine perform-
ance, it will be necessary to check the configuration of
the boards and to download the corresponding software.
s
ofTware updaTe
The machine is equipped with Flash EPROM’s that can
be electrically rewritten.
Use a proper program and system (personal computer
or hand-held computer) to rewrite the machine manage -
ment software without replacing the EPROM’s.
p
re
-
programming
After having loaded the software, use the new board to
define which type of keyboard to use before initialising or
programming the various parameters.
To access the pre-programming function (keyboard
choice), hold down the pre-programming button (see fig.
39 - 9) while powering on the machine.
The display will show the “pre-programming” message
flashing on and off. Press button (9) quickly to scroll the
list of all available keyboards (Canto numerical - Canto
classic - etc.).
Hold down button (9) until you hear a sound signal. The
keyboard on the display will be stored and you can start
initialising.
Fig. 37
1- Transformer primary fuses
2- Transformer secondary fuses
3- Radio interference suppressor
4- Socket always live
5- Mains fuse
6- Transformer
7- Instant boiler heating activation relay
8- Actuation board