Necta Canto Plus Espresso, Установка, эксплуатация и обслуживание

Страница: 35 / 72

© by N&W GLOBAL VENDING S.p.A.
29
10 2009 3325 - 00
c
oins reTurned
Used to define which coins shall be used to give the
change among those available in the tubes. This param-
eter is active only with the coin mechanisms not intend-
ed to manage the choice of the tube in use automatically
(Auto changer payout).
For the coin/value correspondence check the coin
mechanism configuration.
B
anknoTes accepTed
Used to define which banknotes shall be accepted
among those recognised by the reader.
For the banknote/value correspondence check the
reader configuration.
B
elow
-
The
-
level accepTance
Used to define which coins shall be accepted among
those recognised by the validator when the machine is in
the “exact amount” mode.
For the coin/value correspondence check the coin
mechanism configuration.
B
elow
-
The
-
level BanknoTe accepTance
Used to define which banknotes shall be accepted
among those recognised by the reader when the ma-
chine is in the “exact amount” mode.
For the banknote/value correspondence check the
reader configuration.
c
ashless privaTe
To protect the users’ privacy, this function is intended to
display the string “-----” in the place of the credit on the
cashless system.
o
verpay
You can decide whether to cash or leave the credit ex-
ceeding the selection amount at the user’s disposal.
c
ash
-
sale managemenT
Used to give evidence that cash transactions have oc-
curred by means of a cashless system.
The values available are listed here below:
- 0 standard operation: cash transactions are recorded
as such
- 1 forced sending to cashless 1: cash transactions are
recorded as transactions performed by the first cash-
less system
- 2 forced sending to cashless 2: cash transactions are
recorded as transactions performed by the second
cashless system.
p
arallel machine
Function used to enable the presence of a validator or
parallel bill reader to recharge the keys.
e
xacT change equaTion
To choose among 15 different algorithms to enable the
machine to give the change at the end of the selection.
Every single algorithm checks a series of requirements,
such as the amount of coins in the tubes or the (empty
or full) state of the tubes the coin mechanism will use to
give the change.
If one of these requirements is not fulfilled, the machine
can supply no change. In this case, the display will show
the “No change” message.
m
aximum cashless crediT
Function used to set up the maximum credit a cashless
key/card may have to be accepted by the system. If the
key has got a higher value, it will be rejected.
The setup value shall always be higher than or equal to
the value set for the “Maximum cash revalue” function.
If modified and lower, it will be automatically set to the
same value as the “Maximum cash revalue”.
m
aximum cashless recharge
Used to set up the maximum credit you can charge on a
key or card system.
m
inimum TuBe level
Used to set a number of coins between 0 and 15 in order
to establish the status of full change tubes and to warn
the user to “insert the exact amount”.
B
ill reader funcTion
(
Bill revalue
)
Used to enable the bill reader only to recharge the credit
on the cashless system (key or card).
i
ndefiniTe crediT accepTance
This function is intended to accept cashless payment
systems (key or card) or not if the cashless system credit
is not defined.
g
roups of users
The function is intended to associate a price list (list 1,
list 2 and list 3) to the groups of users (from 1 to 5).
All groups of users are associated to list 1 by default.