Necta Canto Plus Espresso, Установка, эксплуатация и обслуживание

Страница: 47 / 72

© by N&W GLOBAL VENDING S.p.A.
41
10 2009 3325 - 00
COMMUNICATION
COMMUNICATION
UP-KEY
GSM
BANK NUMBER
TECHNICIAN> X.X
up-key
seTup managemenT
upkey
->
vending machine
After having inserted the Up key into the plug on the
C.P.U. board, this function is used to select the setup file
from the list on the display. Press the Enter key to load
the setup file you have selected on the machine.
vending machine
->
upkey
After having inserted the Up key into the plug on the
C.P.U. board, this function is used to save on the Up key
a setup file with the same configuration currently avail -
able on the machine.
Please specify the name you wish to assign to the file
(e.g.: CANTO000.STP)
deleTe
Use this function to delete one or more than one setup
file on the up key you have inserted
deleTe all
Use this function to delete all the setup files on the up
key you have inserted.
u
p
k
ey sTaTisTics managemenT
vending machine
->
upkey
Confirm this function after having inserted the Up key
into the plug on the C.P.U. board to save on the up key
the statistics file with all the statistical data currently
available on the vending machine. Please specify the
name you wish to assign to the file (e.g.: CANTO000.
STA).
deleTe
Use this function to delete one or more than one statis-
tics file on the up key you have inserted.
deleTe all
Use this function to delete all the statistics files on the up
key you have inserted.
gsm
(Global System for Mobile communications)
The control software can send a signal of faulty machine,
“prealarms” or “ending product” via GSM modem after
a (programmable) well-defined number of dispensing
cycles of a given product.
p
in code
Function used to programme the identification code that
will be sent to the GSM modem (optional) as soon as
the machine is powered on.
T
hreshold seTup
Function used to define the number of pieces or grams
of powder of a well-defined product, after which to signal
an “ending product” prealarm via modem.
c
ounTer reseT
Function used to reset the counters intended to manage
pre-alarms.
B
ank numBer
The bank number (from 1 to 7) is intended to univocally
define the machines acting as a “GSM slave”, i.e. send -
ing the data by means of the “master” machine modem.
0 is intended to identify the machine directly connected
with the modem, i.e. the “GSM master”, in a bank.