V20200828
•
Page 1 of 4
Model: F5.0L-PSG, F10.0L-PSG, F5.0L, F10.0L
Foam Unit
User Manual
F5.0L-PSG
|
F10.0L-PSG
F5.0L
|
F10.0L
READ ALL INSTRUCTIONS BEFORE USING, OR
SERVICING, THIS EQUIPMENT. KEEP THIS MANUAL
IN A LOCATION THAT IS READILY AVAILABLE TO
USERS AND SERVICE TECHNICIANS.
English (Original Instructions)
* Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
** Area covered and run time may vary based on humidity, air flow, and product used.
Product requirements
Liquid temperature range
40-100˚F (4.4-37˚C)
Chemical compatibility
Chemical products used with this equipment must be formulated for this type of
application and compatible with unit materials and pump seals. For more information
on chemical compatibility, consult the manufacturer or SDS for your product or
contact our customer service department.
Product specifications
F5.0L-PSG
F5.0L
F10.0L-PSG
F10.0L
Power type
Manual
Manual
Chemical pickup type
Pre-mixed solution
Pre-mixed solution
Number of products unit
can draw from
One product
One product
Capacity
1.3 gallons (5 liters)
2.6 gallons (10 liters)
Discharge line length/
diameter
6.5 ft. (2 m) hose, with 1/4 in.
(6.4 mm) inside diameter)
6.5 ft. (2 m) hose, with 1/4 in. (6.4 mm) inside diameter)
Discharge wand/tip type
Polypropylene trigger handle
with 17 in. (43.2 cm) wand
extension and 110˚ fan tip
(7 in. (17.8 cm) stainless
steel wand with zero tip
and ball valve;
Polypropylene trigger
handle with 25˚ fan tip)
Polypropylene trigger
handle with 17 in. (43.2 cm)
wand extension and 110˚ fan
tip
Output distance
3-5 ft. (0.9-1.5 m)
4-5 ft. (1.22-1.52m)
1-3 ft. (0.30-0.91 m)
Output volume
1 gal/min (3.8 l/min)
2.37 gal/min (8.99 L/min) 1.00 gal/min (3.78 l/min)
Flow rate*
0.25 gal/min (0.9 l/min)
0.37 gal/min (1.40 L/min) 0.18 gal/min (0.70 l/min)
Pump seals
Viton
Viton
Run time from full tank**
Approx. 5 min.
Approx. 7 min.
Approx. 10 min.
