Neco STIR-RITE III, Руководство владельца/оператора

Страница: 8 / 60

8
2. WARNING LABELS
Warning Label Overview
• Occupational safety is one of NECO’s primary concerns. Warning labels that conform to
industry standards are provided to identify potential safety hazards that could cause harm and
to INCREASE YOUR AWARENESS OF THE HAZARD.
• It is the Owners & Operators responsibility to ensure that all instructions identified by warning
labels is followed - including any suggested use of personal protective equipment (PPE).
• This following warning label information identifies:
1. Potential hazards that are identified by a warning label.
2. Warning label header or identification.
3. The NECO part number for that warning label.
4. The location of that warning label.
5. What that warning label looks like - note that label pictorials are not shown full size.
• If the warning labels are missing or become unreadable in any way, use the following
information to determine the required part number and contact NECO Customer Service at
402-453-6912 or toll free at 800-367-6208. They will be sent to you FREE OF CHARGE.
• Surfaces must be free of oils, dirt and moisture before applying replacement warning labels.
Table 2 - WARNING LABEL DATA
WARNING LABELS TO BE PLACED ON BIN
LABEL
ID
WARNING LABEL HEADER
NECO
PART
#
QTY LOCATION
A Danger—Rotating Augers 1002306 2 See Figure 2A, page 10
B Danger—Flowing grain traps and suffocates 1002308 2 See Figure 2A, page 10
C Danger—Electrocution Hazard 1002309 2 See Figure 2A, page 10
WARNING LABELS TO BE PLACED ON EQUIPMENT
D Attention—Restarting machine after sitting idle 035692 1 See Figure 2B, page 11
E Danger—Rotating Pulley 035690
AS
REQD See Figure 2B, page 11
F Warning—High Voltage 035691 2 See Figure 2B, page 11