NEC UNIVERGE SL2100, Руководство по функциям и спецификациям

Страница: 627 / 978

To answer a Message Waiting (When VM Message Exist):
If there is a VM message and a Message Waiting set on the same extension and the user dials *0, it will
call the VM pilot because VM has a higher priority. To call back the message waiting caller before calling
VM you must do the following:
1. Press the Message Waiting key (PRG 15-07-01 or SC 751 : 38 ).
- OR-
1. Press Help key + dial
*
0 .
2. Show the current MW status.
3. Change the status by the Up or Down Cursor key.
4. Press Speaker key.
To cancel all your Messages Waiting:
This includes messages you have left for other extensions and messages other extension have left for you.
1. At the Multiline Terminal, press Speaker key.
- OR-
At the Single Line Terminal, lift the handset.
2. Dial 773 .
3. Hang up.
To cancel the Messages Waiting you have left at a specific extension:
1. At the Multiline Terminal, press Speaker key.
- OR-
At the Single Line Terminal, lift the handset.
2. Dial 771 .
3. Dial the number of the extension you do not want to have your messages.
4. Hang up.
To check your messages:
1. Press Help key.
2. Dial
*
0 .
You can have any combination of the message types in the following table on your telephone.
If you see. . . You have. . .
VOICE MESSAGE
n MESSAGE New messages in your Voice Mail mailbox.
CHECK MESSAGE
VRS GENERAL MESSAGE A General message in Voice Mail that has not been heard.
CHECK MESSAGE
(name) Message Waiting requests left at your telephone by your co-workers.
3. Press VOL or to scroll through your display.
4. When you find the message you want to answer, press Speaker key. You either:
• Go to your Voice Mail mailbox.
• Listen to the new General Message.
• Automatically call the extension that left you a Message Waiting.
ISSUE 1.0 SL2100
Features and Specifications Manual 1-613
M