manualshive.com logo in svg

NEC UNIVERGE SL2100, Руководство по функциям и спецификациям

NEC UNIVERGE SL2100 - бизнес-коммуникационная система для организаций всех размеров. Получите быстрое руководство и полный руководящий документ для бесплатной загрузки с manualshive.com. Легко установить и использовать, улучшает эффективность и обеспечивает передовые функции коммуникации для вашего бизнеса.

Поделиться
Скачать
background image

Voice Band Data (VBD) is what is called modem over IP. This feature enables use of VBD (Voice Band
Data) by System. If use VBD. Analog modem signal is converted into voice band data and can be
submitted via SIP Trunk.

For a list of vendors that have successfully completed interoperability certification go to 

http://

www.necntac.com

 and refer to Technical Documentation.

SIP Trunk E.164 Support

With the SIP Trunk E.164 Support enabled the PBX is able to support SIP configurations where the
number presentation within the SIP messages is formatted using the E.164 international numbering
scheme. Specifically the system is able to handle the ‘+’ digit when required as the International
Access Code.

For example a normal international SIP call could be dialed and presented from the system as follows;
Number dialed = 

00441202223344

Request-URI: Invite sip: [email protected] SIP/2.0

However with SIP Trunk E.164 Support enabled the SIP call could be presented once dialed as below;

Request-URI: Invite sip:[email protected] SIP/2.0

This presentation can be a requirement of certain SIP ITSPs (Internet Telephony Service Providers) so
it is necessary the PBX can handle these calls and modify any SIP messages to the correct format
accordingly.
Below is the full list of SIP header fields used by this feature:
Request-URIToFromP-Asserted IdentityP-Preferred Identity

SIP Trunk E.164 CLIP Enhancement

With the SIP Trunk E.164 CLIP Enhancement enabled, when an incoming SIP call from an external
ITSP is presented at the system with a “+” in the From header field as the international access code, it
is recognized and displayed as an international call at the terminal display and also logged in the
terminals incoming caller history, allowing any outbound calls made from a multiline terminals caller
history possible using this numbering scheme.

This presentation can be a requirement of certain SIP ITSPs (Internet Telephony Service Providers) so
it is necessary the PBX can handle these calls and modify any SIP messages to the correct format
accordingly.

FAX path through mode

When SIP Carrier does not support the T.38 Fax relay function, FAX relay can be established using
FAX Path through mode via SIP trunk.

SIP Multi Profile Support

With the SL2100 you can have six SIP Profiles allowing you to connect to six different SIP Carriers, or
allow you to have a SIP System Interconnection and connection to a SIP Carrier.

Conditions

• A maximum of 64 IP Trunks are supported in the SL2100.
• The SL2100 can support six SIP profiles. Multiple carriers or SIP System can be used at the same

time.

• A SIP profile is set to each SIP trunk in Program 14-18-05.
• Calling Party Name is not provided for outgoing calls on SIP trunks.
• E.164 is supported for all carrier choices (PRG 10-29-14).
• E.164 CLIP feature is only possible from Multiline Terminal.
• If VAD is Enable, RTP forwarding (PRG 10-26-02) is not running.
• PRG 84-13-65 applies to system not by each codec.

SL2100

ISSUE 1.0

1-510

IP Trunk - (SIP) Session Initiation Protocol

I

Содержание UNIVERGE SL2100



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для UNIVERGE SL2100

DayTronic System 10 User Manual Book preview
System 10
Бренд: DayTronic Страницы: 414
Carrier AQUASNAP 30RA "B" Operation & Maintenance Instructions Manual preview
AQUASNAP 30RA "B"
Бренд: Carrier Страницы: 36
Grundig CIRFLEXX UMS 4100 Service Manual preview
CIRFLEXX UMS 4100
Бренд: Grundig Страницы: 38
Grandstream Networks GAC2570 User Manual preview
GAC2570
Бренд: Grandstream Networks Страницы: 177
Samcen SCS-350MA User Manual preview
SCS-350MA
Бренд: Samcen Страницы: 44
RADVision SCOPIA XT MCU series Administrator'S Manual preview
SCOPIA XT MCU series
Бренд: RADVision Страницы: 43
Teac CR-K1 Service Manual preview
CR-K1
Бренд: Teac Страницы: 16
Focal SCALA UTOPIA III EVO User Manual preview
SCALA UTOPIA III EVO
Бренд: Focal Страницы: 52
Inter-Tel Basic Digital Phone User Manual preview
Basic Digital Phone
Бренд: Inter-Tel Страницы: 90
Ziton ZPR485-3 Installation Manual preview
ZPR485-3
Бренд: Ziton Страницы: 2
Dahua Technology VTH2421F Series User Manual preview
VTH2421F Series
Бренд: Dahua Technology Страницы: 127
RCA RS2533 User Manual preview
RS2533
Бренд: RCA Страницы: 20
Cattron EliteIQ User Manual preview
EliteIQ
Бренд: Cattron Страницы: 72
LG niagara4 MultiSITE Edge 10 User Manual preview
niagara4 MultiSITE Edge 10
Бренд: LG Страницы: 73
Bosch B420 Setup & Troubleshooting preview
B420
Бренд: Bosch Страницы: 23
JVC LVT1358-001A Instructions Manual preview
LVT1358-001A
Бренд: JVC Страницы: 29
JVC GVT0182-005A Instructions Manual preview
GVT0182-005A
Бренд: JVC Страницы: 28
JVC LVT1266-001A Instructions Manual preview
LVT1266-001A
Бренд: JVC Страницы: 36

Бренды по названию

Популярные бренды

Загрузить еще бренды