![background image](http://html.mh-extra.com/html/nec/ready-es-pro/ready-es-pro_manual_248728098.webp)
96 System specifications
On the back of the CD-ROM reader are two 6-pin jumper blocks
(jumper A and jumper B). The jumper A block is factory set with the
pins open, as shown in the following table.
CD-ROM reader jumper block A settings
PIN
SETTING
SIGNAL
1
Disabled (open)
–
2
Disabled (open)
Factory use only
3
Disabled (open)
Factory use only
The jumper B block sets functions cable select (CSEL), slave (SL),
and master (MA). The following table summarizes the factory set
jumper settings.
CD-ROM reader jumper block B settings
PIN
SETTING
SIGNAL
1
Disabled (open)
CSEL (cable select)
2
Disabled (open)
SL (slave)
3
Enabled (open)
Master (default setting)
Содержание READY ES PRO
Страница 16: ...A look inside 9 4 Remove the three cover screws from the back of the system unit Removing cover screws ...
Страница 31: ...Expansion boards 25 4 Locate the appropriate ISA or PCI slot for your board Locating a slot for your board ...
Страница 64: ...External options 61 Locating your modem and audio connectors modem configurations ...
Страница 65: ...62 External options Locating your external device connectors Ethernet configurations ...