NEC READY ES PRO, Руководство пользователя

Страница: 56 / 110

52 Storage devices
Adding a 5 1/4-inch device
Use the following steps to add a 5 1/4-inch device into an accessible
device slot in your system.
1. Follow the preinstallation instructions that come with your
device, such as setting jumpers and switches.
See “Preparing your device” earlier in this guide for
preparation information.
Note:
If your 5 1/4-inch device comes with drive rails,
do not attach them. Remove any rails already attached.
See the documentation that comes with the device.
2. Remove the system unit cover (see “Taking off the cover”).
!
WARNING
Be sure that the system power is off and the system and its
peripherals are unplugged before you begin the
installation procedure.
3. Remove the front panel by carefully pulling it off the front of
the system unit. Use an even amount of pressure around the
edges of the panel.
Note:
The front panel is secured with six locking
plugs.