![background image](http://html.mh-extra.com/html/nec/ready-es-pro/ready-es-pro_manual_248728013.webp)
Precautions 5
Connecting/disconnecting cables
Take care when you connect or disconnect cables. A damaged cable
can cause a short in the electrical circuit. Misaligned pins can damage
system components at power-on. Prevent damage by following these
guidelines:
Align cable connector pins carefully before you connect the
cable. Check for instructions that show connector keys or
alignment pins for the correct pin alignment.
Route a cable in the system so it is not pinched by other
components. Check that the cable is out of the path of the
system cover.
When you disconnect a cable, always pull on the cable
connector or strain-relief loop, not on the cable.
Содержание READY ES PRO
Страница 16: ...A look inside 9 4 Remove the three cover screws from the back of the system unit Removing cover screws ...
Страница 31: ...Expansion boards 25 4 Locate the appropriate ISA or PCI slot for your board Locating a slot for your board ...
Страница 64: ...External options 61 Locating your modem and audio connectors modem configurations ...
Страница 65: ...62 External options Locating your external device connectors Ethernet configurations ...