manualshive.com logo in svg

NEC READY ES PRO, Руководство пользователя

Поделиться
Скачать
NEC READY ES PRO Скачать руководство пользователя страница 100

    

 98   System specifications

Mouse

 The  Microsoft

®

 IntelliMouse™ is a PS/2-compatible, 400 dots per

inch (dpi) unit. The two buttons on the top of the unit are standard
momentary contact buttons used for mode selection.

 A scrolling wheel between the two buttons is used to scroll vertically
and horizontally on the monitor screen and to zoom in on data on the
screen. The mouse is controlled by Microsoft

®

 IntelliPoint™ software

preinstalled at the factory.

 A rolling ball on the bottom of the mouse moves the cursor on the
monitor screen at a maximum speed of five inches per second in both
the X and Y axis.

 The mouse has a self-cleaning mechanism that prevents a buildup of
dust or lint around the mouse ball and tracking mechanism.

 A six foot straight cable with a 6-pin mini-DIN connector is attached
to the mouse.  

Fax/modem/sound board

 Modem configured systems come with the fax/modem/sound board
pre-installed. The board provides sound, fax, and modem capabilities.
Connectors on the board include a fax/modem port, microphone in
jack, line in jack, line out jack, and MIDI/joystick connector. A
splitter cable that comes with the system allows connection of the
board to a wall phone jack and a telephone.

 The sound portion of the board is compatible with SoundBlaster™
Pro™, SoundBlaster 2, Ad Lib™, MPU-401, and Microsoft

®

Windows Sound System™ for PC sound applications.

Содержание READY ES PRO















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды