NEC READY ES PRO, Руководство пользователя

Страница: 54 / 110

50 Storage devices
„
Carefully lift the power supply out of the system unit. You
might need to label and disconnect any cables that do not
reach outside the unit.
5. Connect the IDE and power cables to the new hard disk as
follows:
„
Carefully place the system unit on its side with the open
side facing up.
„
Locate the four holes on the bottom of the hard disk.
„
Hold the hard disk with the holes facing the floor of the
system unit and the connectors facing the front of the unit.
„
Connect the IDE and power cables to the hard disk (see
“IDE cables”).
6. Install the hard disk in the drive slot as follows:
„
Locate the four holes on the bottom of the system unit (see
the following figure).
„
Position the hard disk in the hard disk drive slot area (see
“Taking a quick look inside”).
„
Align the four holes on the bottom of the hard disk with
the holes in the drive slot (see the following figure).
Secure the hard disk with the four screws that come with
the hard disk.