![background image](http://html.mh-extra.com/html/nec/ready-es-pro/ready-es-pro_manual_248728067.webp)
64 External options
Connecting an NEC CS500 monitor
Some systems ship with the NEC CS500 monitor. The monitor
integrates in one cabinet an NEC color monitor, two amplified
speakers, and a microphone.
If your system comes with the NEC CS500 monitor, use the
following steps to connect the monitor to the back of your system
unit. Also see the documentation that comes with the monitor.
1.
Turn off and unplug the system unit and any external options
connected to the system unit.
2.
Locate the signal cable connector, microphone connector, and
speaker connector on the monitor cable.
Identifying the NEC CS500 monitor cable connectors
Содержание READY ES PRO
Страница 16: ...A look inside 9 4 Remove the three cover screws from the back of the system unit Removing cover screws ...
Страница 31: ...Expansion boards 25 4 Locate the appropriate ISA or PCI slot for your board Locating a slot for your board ...
Страница 64: ...External options 61 Locating your modem and audio connectors modem configurations ...
Страница 65: ...62 External options Locating your external device connectors Ethernet configurations ...