System memory 19
Adding memory modules
Use the following steps to install memory modules.
1.
Remove the system unit cover (see “Taking off the cover”).
!
WARNING
Be sure that the system unit power is turned off and the
system is
unplugged before you begin the installation
procedure.
2.
Locate the memory upgrade sockets for your configuration
(see “Checking the memory in your system”).
If you need to remove a memory module, see “Removing a
memory module” in this guide.
!
CAUTION
Before you install a memory module, reduce static
discharge by touching the system’s metal chassis.
3.
Insert the memory module as follows:
Press out the plastic locking clips at the ends of an empty
socket.
Align the notches on the module with the keys in the
memory socket.
Insert the module into the socket.
Press in the plastic locking clips at the ends of the socket
until they lock in place on the module.
Содержание READY ES PRO
Страница 16: ...A look inside 9 4 Remove the three cover screws from the back of the system unit Removing cover screws ...
Страница 31: ...Expansion boards 25 4 Locate the appropriate ISA or PCI slot for your board Locating a slot for your board ...
Страница 64: ...External options 61 Locating your modem and audio connectors modem configurations ...
Страница 65: ...62 External options Locating your external device connectors Ethernet configurations ...