![background image](http://html.mh-extra.com/html/nec/ready-es-pro/ready-es-pro_manual_248728055.webp)
Storage devices 51
Securing the hard disk
7.
Carefully lift the system unit back into its upright position.
Replace the system unit cover (see “Replacing the cover”).
8.
Replace the power supply in the system unit. If you
disconnected any cables, reconnect them. Secure the power
supply with the four screws you removed earlier.
9.
Run the Setup utility to set your new configuration. See
“Setup Utility” in the “Advanced Topics” category of your
NEC Help Center.
This completes your 3 1/2-inch device installation!
Содержание READY ES PRO
Страница 16: ...A look inside 9 4 Remove the three cover screws from the back of the system unit Removing cover screws ...
Страница 31: ...Expansion boards 25 4 Locate the appropriate ISA or PCI slot for your board Locating a slot for your board ...
Страница 64: ...External options 61 Locating your modem and audio connectors modem configurations ...
Страница 65: ...62 External options Locating your external device connectors Ethernet configurations ...