32 System processor
Removing the processor
To upgrade your processor, you must first remove the processor
currently in your computer. Use the following steps to remove it.
1.
Remove the system unit cover (see “Taking off the cover”).
!
WARNING
Be sure that the system unit power is turned off and the
system is
unplugged before you begin the installation
procedure.
2.
Locate the processor socket on the system board (see
“Looking at the system board”).
If you have expansion boards obstructing your view of the
socket, remove them (see “Removing a board”).
If the power supply is obstructing your access to the
processor socket, remove it (see step 3). Check “Taking a
quick look inside” for the location of the power supply.
Содержание READY ES PRO
Страница 16: ...A look inside 9 4 Remove the three cover screws from the back of the system unit Removing cover screws ...
Страница 31: ...Expansion boards 25 4 Locate the appropriate ISA or PCI slot for your board Locating a slot for your board ...
Страница 64: ...External options 61 Locating your modem and audio connectors modem configurations ...
Страница 65: ...62 External options Locating your external device connectors Ethernet configurations ...