Options 3-7
4.
Install the expansion board into an expansion slot connector (and guide rail if
installing a full-size board). If installing a PCI board in the shared slot, install the board
component side down in the top PCI connector. If installing an ISA board in the shared
slot, install the board component side up in the ISA connector under the PCI connec-
tor.
NOTE:
A full-size expansion board cannot be in-
stalled into the inside expansion slot.
5.
Reinstall the expansion slot screw to secure the expansion board.
6.
Connect any expansion board cables.
7.
Reinstall the top cover.
Minitower Expansion Board Installation
Install expansion boards in the minitower system as follows.
1.
Remove the top cover (previously described) and the bottom access cover (see Sec-
tion 6).
2.
Locate the expansion slot for board insertion (see Figure Section 3-8). Remove the slot
screw and cover. Save the slot cover for use if the board is removed in the future.
Figure Section 3-8 Minitower Expansion Slots
Содержание PowerMate VP75
Страница 147: ...Desktop Repair 5 21 ...
Страница 173: ...Minitower Repair 6 25 ...