3-12 Options
3.
Install the processor in the socket as follows.
n
Align the processor with the socket (see Figure Section 3-11).
CAUTION:
Incorrect alignment of the
processor in the socket can damage the
processor and system board.
After installing the processor, check that the proces-
sor’s speed and voltage jumpers on the system
board are set correctly for the processor (see Sec-
tion 2, Setup and Operation).
n
Insert the processor in the socket, and swing the lever down to lock the
processor in place.
n
Insert the heat sink clips over the tabs on the socket, and press the heat sink down
until it locks in place.
Figure Section 3-11 Processor Alignment
4.
Set the processor’s speed and voltage jumpers on the system board for the
installed processor (see Section 2, Setup and Operation).
Содержание PowerMate VP75
Страница 147: ...Desktop Repair 5 21 ...
Страница 173: ...Minitower Repair 6 25 ...