![background image](http://html.mh-extra.com/html/nec/powermate-p2166/powermate-p2166_service-manual_248701119.webp)
3-36 Option Installation
Installing the Minitower 3 1/2-Inch Drive
Install the hard disk drive into the rear slot as follows.
1.
Remove the system unit cover.
2.
Follow the preinstallation instructions that come with the device, such as setting
jumpers and switches.
3.
Remove and label any cables that interfere with installing the device.
4.
To install the internal hard disk drive, you must first remove the power supply.
Remove the power supply as follows.
Locate the power supply as shown in the following figure.
Figure 3-37 Locating the Power Supply
Disconnect the power supply cables from the system board.
Remove the power supply screws (see the following figure).
Содержание POWERMATE P2166
Страница 217: ...Index 4 ...