manualshive.com logo in svg

NEC POWERMATE P2166, Руководство по обслуживанию

NEC POWERMATE P2166 - мощный компьютер с отличным производительностью. Здесь вы можете бесплатно скачать руководство пользователя в формате PDF. Просто посетите {веб-сайт} и скачайте нужное вам руководство, чтобы получить всю необходимую информацию о своем устройстве.

Поделиться
Скачать
background image

Setup and Operation      2-31

Load Setup Defaults

To load all the default Setup values in the Setup menus, select “Load Setup Defaults” from
the Exit Submenu. Reloading the defaults does not affect the any set passwords. The
program displays this message:

 Load Setup Defaults?
Press Enter to Continue
Press ESC to Abort

To load the defaults shipped with the system press 

Enter

. Press 

Esc

 to return to the Exit

submenu without affecting your changes.

Discard Changes

To undo any changes you have made in the Setup menus since Setup was last saved, select
“Discard Changes.” The program displays this message:

 Discard Changes?
Press Enter to Continue
Press ESC to Abort

To reset all changes made in the current session of Setup, press 

Enter

. Press 

Esc

 to return

to the Exit submenu without affecting your changes.

BIOS UPDATE UTILITY

The system BIOS resides on a flash ROM in the system. The flash ROM can be updated,
should it ever become necessary. This feature allows the ROM BIOS chip to be flashed with
a new BIOS code through software, rather than replacing the chip.

Performing an update is done with a BIOS flash diskette. The diskette, which contains the
latest version of the BIOS code, can be obtained from NEC Computer Systems Division or,
if a modem is available, the latest BIOS can be downloaded from NECCSD’s Bulletin
Board Service (BBS).

If a modem is available, use the following procedure to access the BBS for the latest
version of the BIOS Update utility. How to flash the BIOS with a flash diskette is described
following the BBS access procedure.

NECCSD Bulletin Board Service

If you have access to a modem, the NECCSD Bulletin Board Service (BBS) can be used to
provide you with the latest information on hardware and software. The BBS allows you to
download files (video drivers, printer drivers, BIOS updates, etc.) for system enhancements
and upgrades.

The BBS can also be accessed through the CompuServe online service.

Содержание POWERMATE P2166




























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для POWERMATE P2166

BAC 3000 Series Rigging & Assembly Instructions preview
3000 Series
Бренд: BAC Страницы: 24
Datalogic MEMOR K User Manual preview
MEMOR K
Бренд: Datalogic Страницы: 88
IBM NetVista 8302 Hardware Maintenance Manual preview
NetVista 8302
Бренд: IBM Страницы: 314
Supero SuperWorkstation 5038A-IL User Manual preview
SuperWorkstation 5038A-IL
Бренд: Supero Страницы: 122
Zotac ZBOX EDGE MI623 User Manual preview
ZBOX EDGE MI623
Бренд: Zotac Страницы: 21
Matrox 4Sight GPm Installation And Hardware Reference preview
4Sight GPm
Бренд: Matrox Страницы: 174
LDI Spaces SAFCO MUV 1926 Assembly Instructions preview
SAFCO MUV 1926
Бренд: LDI Spaces Страницы: 5
Acorn Computers Limited PLUS 1 User Manual preview
PLUS 1
Бренд: Acorn Computers Limited Страницы: 30
Sharp PC-4702 Service Manual preview
PC-4702
Бренд: Sharp Страницы: 83
Sharp PC-1500A Instruction Manual preview
PC-1500A
Бренд: Sharp Страницы: 168
Siemens SIMATIC IPC847C Getting Started preview
SIMATIC IPC847C
Бренд: Siemens Страницы: 46
Siemens SIMATIC PC RI25 Manual preview
SIMATIC PC RI25
Бренд: Siemens Страницы: 64
Siemens SIMATIC Panel PC 677 Operating Instructions Manual preview
SIMATIC Panel PC 677
Бренд: Siemens Страницы: 94
Siemens SIMATIC PG 760 PII Manual preview
SIMATIC PG 760 PII
Бренд: Siemens Страницы: 120
Siemens simatic PC 577 Operating Instructions Manual preview
simatic PC 577
Бренд: Siemens Страницы: 192
Siemens SIMATIC IPC847D Operating Instructions Manual preview
SIMATIC IPC847D
Бренд: Siemens Страницы: 222
Toshiba Tecra S2 Specifications preview
Tecra S2
Бренд: Toshiba Страницы: 8
Toshiba TLCS-900 Family Data Book preview
TLCS-900 Family
Бренд: Toshiba Страницы: 751

Бренды по названию

Популярные бренды

Загрузить еще бренды