Repair 5-28
Power Supply Removal
Remove the power supply as follows.
1.
Remove the system unit cover as previously described (see “System Unit Cover
Removal”).
2.
Unplug the two power cables attached to the system board’s connectors. See
Appendix A for connector locations.
3.
Remove the two screws securing the power button to the front of the system unit
chassis (see Figure 5-33).
Figure 5-33 Power Button Screws
4.
Unplug the power cables from all installed devices.
5.
Cut any tie wraps that may be securing the power cables to the system unit chassis
or drive brackets.
6.
Remove the four screws securing the power supply to the system unit chassis (see
Figure 5-34).
Содержание POWERMATE P2166
Страница 217: ...Index 4 ...