Setup and Operation 2-37
System Recovery erases and resets the hard disk completely before reinstalling the files.
CAUTION
: If you are doing a Full System
Recovery, ALL files on the hard drive will be
deleted and replaced by the factory installed files.
You will
lose data
need to reinstall any software you installed
yourself.
Full System Recovery should only be used if
the preinstalled software is unusable. If you
are unsure about using this procedure, call the
NECCSD Technical Support Center (TSC).
TSC representatives will help you determine
if this is your situation. See Section 4 for the
technical support telephone number.
The System Recovery requires booting from the CD Restore disc. Here is the procedure to
start the recovery process. Follow it carefully.
1.
With system power on, insert the CD Restore disc into the CD-ROM reader.
2.
Turn system power off.
3.
Turn on system power. The System Recovery screen provides information about
the restore process. Read this information.
You can choose one of the following two options:
Continue — Proceeds with the recovery program.
Quit — Exits the recovery program back to the operating system.
4.
Click “Continue” to proceed with the System Recovery. A license agreement
appears.
5.
Read the license agreement and click “I agree” to continue. The Start System
Recovery screen appears.
6.
The Start System Recovery screen states that all the files will be removed and that
this process is irreversible. At the “Are you sure?” prompt, click “Yes” to
continue.
Содержание POWERMATE P2166
Страница 217: ...Index 4 ...