manualshive.com logo in svg

NEC POWERMATE P2166, Руководство по обслуживанию

NEC POWERMATE P2166 - мощный компьютер с отличным производительностью. Здесь вы можете бесплатно скачать руководство пользователя в формате PDF. Просто посетите {веб-сайт} и скачайте нужное вам руководство, чтобы получить всю необходимую информацию о своем устройстве.

Поделиться
Скачать
background image

xvii

Preface

This service and reference manual contains the technical information necessary to set up,
maintain, troubleshoot, and repair the NEC PowerMate

 P2166/P2200M Series computer

systems. It also provides hardware and interface information for users who need an
overview of the computer system design. The manual is written for NECCSD-trained
customer engineers, system analysts, service center personnel, and dealers.

The manual is organized as follows:

Section 1, Technical Information, provides an overview of the computer features,
hardware design, interface ports, internal devices and system unit specifications.

Section 2, Setup and Operation, gives general setup and operation information. Included
is a description of the system Setup utility and the factory default configuration settings. A
procedure is provided for logging onto the NECCSD Bulletin Board and obtaining the
latest Flash ROM BIOS.

Section 3, Options, provides safety precautions and installation procedures for installing
options.

Section 4, Maintenance and Troubleshooting, includes a list of NECCSD service
information and telephone numbers that provide access to the NECCSD Bulletin Board
System (BBS), FastFacts, and Technical Information Bulletins. Recommended maintenance
information and solutions to possible problems that may occur, are also provided.

Section 5, Repair, provides desktop and minitower disassembly and reassembly procedures
along with an illustrated parts breakdown. NECCSD service and spare parts ordering
information is also provided.

Appendix A, Connector Pin Assignments, provides a list of the system board’s internal
connector pin assignments and a list of external pin assignments for the keyboard/mouse,
serial port, parallel port, and video port.

Appendix B, Setting System Board Jumpers, provides jumper information for
configuring the system for a particular requirement.

Appendix C, Hard Disk Drive Specifications and Jumper Settings, provides
specifications and jumper settings for the hard disk drives that ship with the PowerMate
P2166M/P2200M Series systems.

Appendix D, CD-ROM Reader Specifications and Jumper Settings, provides
specifications and jumper settings for the CD-ROM readers that ship with the PowerMate
P2166M/P2200M Series systems.

Содержание POWERMATE P2166




























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для POWERMATE P2166

IBM Aptiva 2140 Maintenance Service Manual preview
Aptiva 2140
Бренд: IBM Страницы: 212
IBM 9228 - IntelliStation Z - Pro Installation Manual preview
9228 - IntelliStation Z - Pro
Бренд: IBM Страницы: 72
IBM 9114-275 - IntelliStation POWER 275 Installation Manual preview
9114-275 - IntelliStation POWER 275
Бренд: IBM Страницы: 102
IBM 8863 - eServer xSeries 366 Installation Manual preview
8863 - eServer xSeries 366
Бренд: IBM Страницы: 94
IBM 8543 Hints And Tips preview
8543
Бренд: IBM Страницы: 4
IBM 4190 User Manual preview
4190
Бренд: IBM Страницы: 84
IBM 2283 User Manual preview
2283
Бренд: IBM Страницы: 96
IBM 5280 User'S Setup Procedures preview
5280
Бренд: IBM Страницы: 156
IBM 5280 Technical Newsletter preview
5280
Бренд: IBM Страницы: 178
IBM 5280 Maintenance Information Manual preview
5280
Бренд: IBM Страницы: 155
IBM Aptiva 2159 Hardware Maintenance Service preview
Aptiva 2159
Бренд: IBM Страницы: 214
SilverStone SST-GD02B Grandia Sereis GD02 Product Overview preview
SST-GD02B Grandia Sereis GD02
Бренд: SilverStone Страницы: 14
Alienware Area-51 R5 Setup And Speci?Cations preview
Area-51 R5
Бренд: Alienware Страницы: 21
7starlake PER35A User Manual preview
PER35A
Бренд: 7starlake Страницы: 48
Sun Microsystems SPARC classic X Service Manual preview
SPARC classic X
Бренд: Sun Microsystems Страницы: 198
Asus GL12CP User Manual preview
GL12CP
Бренд: Asus Страницы: 52
Asus ET2410IUTS Specifications preview
ET2410IUTS
Бренд: Asus Страницы: 2
Asus FX10CS User Manual preview
FX10CS
Бренд: Asus Страницы: 50

Бренды по названию

Популярные бренды

Загрузить еще бренды