![background image](http://html.mh-extra.com/html/nec/neccare-platinum-express5800-a1160/neccare-platinum-express5800-a1160_installation-manual_251387060.webp)
Checking
and Updating Management firmware Level and the BIOS Level
5-8
5.4.2.
Checking Management Firmware Level using Remote Console
Interface
Check the management firmware level on the Service Processors for the partition, as
follows:
1. Click
Firmware Update
in the left column.
The firmware update page appears, as shown in
Figure 5-6
.
Figure 5-6 Management Firmware Update Page
2. Click
Display Current Firmware Status and Revision
.
A dialog box appears containing the current management firmware revision level for
each cell in the partition, as shown in
Figure 5-7
. All cells in the partition should
have the same firmware level.
Note: If a cell is not listed in the dialog box, it is AC powered off or otherwise not
communicating properly.
Содержание NECCare Platinum Express5800/A1160
